 |
| Full Poster |
Joined: Thu Apr 29, 2004 1:20 pm Posts: 162 Location: Ottawa
|
|
Bought the front and rear engine mount from Prothane (solid mounts) To my surprise my stock front motor was torn around the outer edge, removed it and pressed in the front Prothane mount and my wheel hop is gone. Debating if\when to install the rear mount, thus far little to no change in vibrations. Only bad thing would be how hard it is to line up as the stock motor mount hole is off center and the prothane is in the center of the mount.
9 out of 10 rating
|
|